Three-share, four-share, five-share, six-share, ploughshare plough parameters introduction

Introduction to the parameters of three-share, four-share, five-share and six-share plough.

There are 18, 20, 20A, 25, 27, 30, 35 and other types of plough, which can be applied to sandy loam, loam and clay all over the country. The specific resistance of cultivated dry farming soil shall not exceed 1.2kg/cm2. After ploughing, the surface is flat, the broken soil covering performance is good, and the surface organic matter can be effectively buried at the bottom of the ditch, which decays rapidly, improves the soil strength, and maintains the quality of soil structure well.

Plough products have good supporting performance and can be used with various domestic tractors.

The three- to six-plough plough is a type of plough that takes into account both water and dry farming. This series of split ploughs is matched with 30-80 hp wheeled tractors and is suitable for dry farming and dry farming operations with soil specific resistance below 0.8-1 kg/cm. It can not only meet the requirements of normal tillage depth, but also meet the agronomic requirements of the gradual deepening of the tillage layer (up to more than 30cm). The plough has good performance, stable work, easy operation, high coverage, ditch bottom, ground leveling, and can basically meet the requirements of agronomic land preparation in various regions.

The mass of the whole machine is 221 (kg); dimensions(2360×1240×1430) (mm); Support power host model: JS-550; Name: Wheeled tractor, 12 hours power 40.4 kilowatts, hook form: suspended, ploughshare material: 65Mn, ploughshare hardness (HRC): heat treatment zone 52, non-heat treatment zone 28, tillage depth 150-240 (mm), part number 4, single part width 250 (mm), plough depth stability coefficient of variation 3 (%); Working width 1 (m); Operational efficiency 3-6 (mu/h)

If you have any other needs, please feel free to contact us.